Monthly Construction Log - June 2010

Date
1	Painted electrical control unit enclosure.
2	Assembled electrical control unit.
3	Riveted radio rack to instrument panel. Started marking location for Hobbes timer.
4	No work.
5	No work.
6	Cut opening in panel for Hobbs timer.
7	No work.
8	No work.
9	No work.
10	No work.
11	No work.
12	Installed radio support channels. Installed floorboard access panel and brake line clamps. Started fabricating wiring harnesses.
13	Drilled flap handle frame for stabilator down-bungee. Clamped piece of predrilled wood to frame to act as drill guide rather removing frame. Started installation of bungee.
14	Cut out flap handle trim. Clamped bungee and checked stick tension. Reinstalled flap handle with trim pieces.
15	Filled rivets and screws on instrument panel and primed.
16	Touched up primer on instrument panel.
17	No work.
18	No work.
19	No work.
20	No work.
21	No work.
22	No work.
23	Completed prepping instrument panel for paint.
24	No work.
25	No work.
26	Painted instrument panel.
27	Working on instrument panel equipment installation and wiring.
28	Working on instrument panel equipment installation and wiring.
29	Working on instrument panel equipment installation and wiring.
30	No work.